SPICE Simulation

Introduction

Run SPICE simulations on your circuits to analyze their analog behavior.

Passive Filters

High-Pass Filter (RC): An example of an RC high-pass filter circuit configured for SPICE simulation.
Low-Pass Filter (RC): An example of an RC low-pass filter circuit configured for SPICE simulation.

Diodes

Half-Wave Rectifier: An example of a half-wave rectifier circuit for SPICE simulation.
Full-Wave Rectifier: An example of a full-wave rectifier circuit for SPICE simulation.

Transistors

Switch: An example of using a switch to drive a transistor in a SPICE simulation.

PCB Trace Simulation (tsci simulate)

Run analog simulations from the command line with tsci simulate, from a schematic RC circuit with ngspice to a routed DDR3 trace with IBIS models and an eye diagram using pcb_spice.

An adventure-style walkthrough of tsci simulate. Follow one bit from the practice village of ngspice to a real DDR3 trace on the AM3352 board, through the field solvers, past the IBIS gatekeepers, to the eye diagram at the end of the road.

Power Converters

Boost Converter: An example of a boost converter circuit configured for SPICE simulation.